The way to Get a Crow's Foot Texture Effect on Walls Without a Brush

Crow’s foot texture, or even slap cleansing since it is also known as, usually involves loading up a brush using drywall mud and actually “slapping” it onto the walls. This process leaves dried ridges and valleys of vaccine mud which, when painted, resemble crow’s foot paths around your wall. Although usually achieved by brushing, a newer method is to utilize a premolded roller to create precisely the same patterns. The roller technique will do the job only as well as the brush technique also will save you a considerable amount of time in the procedure.

Put dropcloths over flooring where the walls are to be textured. Move all furniture from the room, if possible. If the furniture cannot be moved, cover it with dropcloths or tarps.

Add 1 part of drywall compound to five parts of new water in a bucket. Stir them together so you get a smooth creamy mixture. Ideally, you want a solution that’s the consistency of sour cream or a thick milkshake. Add water and masonry compound to the bucket until you’ve achieved this consistency.

Pour the mixture into a roller pan.

Dip the crow’s foot roller to the mixture until it is completely covered. Pull the roller back over the ridges in the pan to get rid of any surplus drywall solution.

Roll the mixture onto the wall. Work in little 4-foot by 4-foot locations and completely cover this space before continuing on to another. Begin at the top of the wall and work your way down. When the roller isn’t any longer departing texture on the wall, load the roller back up with masonry mixture and finish the area.

Allow the drywall mixture to dry completely. Prime the texture, then top coat it with your choice of colored latex house paint.

See related