How to Pressure Wash Your Driveway

When it comes to maid service Pasadena the driveway, many homeowners immediately think of hiring a professional. But you can actually remove the wear and tear from your driveway with just a few simple steps. Doing so will save you money that you would have spent on hiring a professional washer.

Here’s how to use a pressure washer to clean your driveway:

Sweep the Surface

First, clear any dirt and debris from the driveway using a broom. Next, cover the nearby walls and doors with plastic sheeting and a tape. This is to protect your home exterior from any loose debris as a result of the cleaning services Pasadena.

Read the Safety Manual

Carefully read and understand the steps on how to use your pressure washer, especially the safety precautions. Each and every pressure washer is different and some may require special preparation.

Degrease the Driveway Surface

To ensure excellent results, spray the concrete surface of your driveway with a spray degreaser. Keep a distance of about six inches away from the surface and scrub the degreaser into the concrete with the use of a stiff brush. You can also use the attachment tool of the pressure washer for this.

Attach a Spray Wand Tip for the Detergent

Next, choose the tip that’s designed for washing. This is often labeled on the pressure washer as soap. Snap it into the spray wand tip.

Attach the Hoses

Attach the hose to the pressure washer. The hose is provided when you buy the device. Next, connect a 50-foot garden hose into the water supply of the pressure washer and turn the device on.

Prepare the Pressure Washer for Detergent

The pressure washer will already come with a detergent siphon tube that you can attach to a detergent container. The moment you turn the pressure washer on, the siphon tube will immediately bring the detergent towards the water stream of the machine’s spray wand.

Spray Detergent

Wear a pair of safety gloves in order to keep your hands protected. Once you have the gloves on, you can start applying the detergent by holding the spray handle down while making sure that you keep a consistent distance of 8 to 18 inches away from the driveway.

Start by working your way back and forth on the surface while maintaining a smooth and controlled manner. Overlap each stroke with six to eight inches in each stroke and when you’re done, leave the sprayed detergent on the surface for about five minutes.

Pressure Wash Concrete

Next, change your tip to the one that’s labeled “25 degrees.” You can now start to pressure-wash the driveway by holding the spray handle down and working your way from one side to another.

Seal Concrete

Now that you’re done with Pasadena cleaning service, it’s time to seal the driveway. Start by pouring a waterproof sealer to the paint pan. Add a roller cover to the roller and attach the extender pole. Beginning in the middle, apply the waterproof sealer using the roller. Leave the surface to dry for at least 24 hours before you start using the driveway.